My experience with BMW, could be similar. There will be an A symbol next to headlight icon somewhere on dash/stalk. Once it’s on, don’t touch the main beam as the car will auto dip when it senses light from cars.

I’ve found it’s pointless unless on a very dark B road as it ends up just turning off and on so much due to cars, people think you’re flashing them.

Auto main/dip has to be switched on via the R Link, Driver aids.
When activated turn the light stalk to Auto and forward as you would for main beam.
When in this position a white main beam symbol with either an A or auto appears on the instrument panel.
When no on coming traffic or red tail lights are sensed it will flick on to main or to dip.

Is this of help.

Well it was on the order form and invoice, the car has lane departure warning which is part of Viso, so let's hope so.

Yep they are on it, option confirmed on the car.

As promised a very brief & short video on how to switch on "Auto" dip/maim.

https://www.youtube.com/watch?v=REG2BcgEd2o

Edited by user 13 September 2018 21:47:33(UTC)  | Reason: Not specified

Try the link again

Thanks RED21 the option is not there at the bottom, dealer sorting.

Same question from me, has anyone had this sorted? I hadn't really driven anywhere that needed beams until the last couple of weeks since I got mine in the summer.

I had done much the same as the op by assuming it would just work but quickly realised it didn't.

I saw this thread so comtacted my dealer and got it looked at this afternoon, and after having a few conversations with various staff explaing that my lights work its the auto dip function that isn't available they acknowledged they issue.

Anyhow the service guy then came back to me and said the r.s. doesn't come with it. They said they brought up my car and a kolios on the itg system and it shows the kolios with visio has auto dip beam and the r.s. doesn't. I think they did it with my trophy with it and also their 280 demonstrator that i assume has visio, at this point I directed them to the brochure which clearly shows that the visio pack has lane departure, sign recognition and indeed auto hi/low beam.

Their technition is now going to contact renault to see if there is anything that they can install.

I guess the two questions are, does anyone with an r.s. with visio pack have operating hi/low beam function; and has anyone had it successfully retro installed?

Any more news on this?

I've just checked the configurator and your correct that it only lists lane departure and sign recognition.

Maybe the RS cant run with auto dip due to the headlights fitted. Aren't these superior LED units compared to others in the range.

To be honest most people I've spoken to with Auto dip on other cars say there annoying and too slow to react, so it may not be so bad after all.

It wont just be software because the lighting ecu will need to control the high beam independently to your lighting control stork/switch. So there will be some lighting control logic and additional relays. There may also be different power/drive requirements to run these lights.